Before ordering, a hospital needs three decisions on paper: which opening styles each ward will stock, which sizes go on the shelf, and how many gowns to buy for every bed. Settle those three and the quotation, the sample and the reorders all become simple. This guide on how to choose patient gowns walks through each decision as a linen store or purchase team would, with the garment facts we need from you at enquiry.
We are a garment maker, so everything below is about the garment itself. Which gown a particular patient wears is a decision for your nursing team.
Decide the opening style ward by ward
A patient gown differs from the next mainly in where it opens and how it closes. Most hospitals do not need every style. They need the one or two that their wards already ask for, made consistently.
| Style | What it is | Points to settle at enquiry |
|---|---|---|
| Back-open gown | Opens fully at the back, closed with fabric ties | Number of tie pairs, sleeve type, length |
| Front-open gown | Opens down the front like a coat | Ties, buttons or wrap; pockets |
| Top and pyjama set | Button-front shirt with a pyjama | Drawstring or elastic waist; collar |
| Maternity gown | Fuller body with a front opening | Fastening; length |
| Children’s gown | Smaller gown sized by age band | Age bands; ties or press studs |
A practical way to start is to walk the wards and note what each one uses today. If a ward is happy with its current gown, send us a photo or a sample piece and we will match the pattern. If staff have complaints, such as ties that come loose or backs that gape, note them too. Those details shape the sample.
Keep the number of styles low. Every extra style means another shelf, another line on the quotation and another set of cartons to sort. Two or three styles cover most general hospitals; a maternity unit or a children’s ward adds its own.
Settle the sizes before the count
Patient gowns are shared, so the size question is different from staff uniforms. Nobody gives you a personal measurement. You are stocking a shelf that has to fit whoever is admitted next.
There are two common approaches:
- One free size on every shelf. Simple to stock and simple to sort. The cut relies on a wide overlap and long ties to fit a range of builds.
- A few adult sizes. A smaller and a larger size alongside the main one, so very slight or very large patients are not left in a gown that does not sit well.
Children’s wards work separately, with gowns cut in age bands that we agree with you at quotation. Our post on free size or sized patient gowns goes deeper into that choice.
Whichever route you pick, write down the ratio between sizes for each ward. It does not need to be exact on the first order. You will refine it from what the laundry returns and what the wards run short of.
Work out how many gowns per bed
The count is where most first orders go wrong, usually by ordering too few. A gown is not only on a patient. At any moment some are in the laundry, some are drying or being folded, and some sit on the ward shelf waiting for the next admission.
To get a working figure, ask your laundry team three things:
- How long does a gown take to go from the ward to the laundry and back again?
- How often are gowns changed on a typical ward in a day?
- How many spare gowns does each ward like to hold for admissions at night?
Multiply your bed count by a per-bed figure that covers those answers, then add a small reserve for gowns that are lost or retired. Do it ward by ward rather than for the whole hospital. A busy surgical ward and a quiet long-stay ward will not turn gowns over at the same rate.
Choose fabric, colour and marking together
Fabric, colour and marking are linked, so decide them in one sitting.
- Fabric. We stitch gowns in cotton or poly-cotton. Cotton is soft and familiar; poly-cotton creases less and dries faster. Our cotton or poly-cotton comparison covers the trade-off.
- Colour. Light shades are the usual ward choice. Some hospitals give one unit its own colour so the laundry can sort it at a glance. The full list is on our fabrics and colours page.
- Marking. A small embroidered hospital name or unit name helps gowns come back to the right place. Computerised logo embroidery is available, and we confirm size and placement at quotation.
If two wards share a laundry but should keep separate stock, either a different colour or a different embroidered name will do the job. You rarely need both.
Put it together for the quotation
With those decisions made, the enquiry is short. Send us a list with these lines for each style:
- style and opening, with any changes from our standard pattern;
- fabric and colour;
- quantity per size, or per age band for children’s gowns;
- any embroidery, with the logo file or the text;
- delivery city and the date you need the gowns.
Bulk orders start at 25 pieces per style, and sizes can be mixed inside that number. We send a sample first; once your team approves it, that sample becomes the reference for the bulk order and for every reorder after it. The steps are set out on our how to order page, and the full range of styles is on the patient gowns page.
Once the first order is in use, keep a simple note of which sizes and styles ran short. That note turns the next order from a guess into a plan, and it is the quickest way to refine how to choose patient gowns for your own wards.