Skip to content
NurseUniforms.co.in by MISHAREN Garments

Keeping a Doctor Coat Crisp Between Washes

A doctor coat stays crisp between washes when it is hung properly every evening, pressed on the collar and lapels with a warm iron on the inside, and rotated with a second coat so neither is worn too many days in a row. Small daily habits matter more than a heavy weekly press. This post covers how to iron doctor coat collars, lapels and sleeves, how to wash and dry a white coat at home, and how to keep it looking neat through a long working week.

Hanging and airing at the end of the day

What happens to a coat in the evening decides how it looks in the morning. Draped over a chair, it creases at the back and the lapels fold the wrong way. Hung properly, most creases drop out overnight.

  • Use a shaped hanger, not a thin wire one. A wider hanger supports the shoulders so they do not pucker.
  • Empty the pockets. A phone, a notebook and pens left in the lower pockets drag the front down and stretch the pocket mouths.
  • Do up the top button. This keeps the lapels lying in their fold line.
  • Hang it where air moves, away from a wall and out of a cupboard for the first hour, so it dries out after a warm day.

If you wear the coat again the next day, a quick touch of the iron on the collar is often all it needs.

How to press the collar and lapels

The collar and lapels frame the face, so they are what people notice first. Press them every time, even when the body of the coat looks fine.

  1. Set the iron by fabric. Use a warm setting for poly-cotton twill and a hotter setting for cotton. Check the care label first.
  2. Collar first, from the underside. Lay the collar flat with the underside facing up. Press from the points towards the centre back, so any small ripple moves to the middle where it is hidden.
  3. Fold and set the collar. Turn the collar down along its natural fold line and press the fold lightly.
  4. Lapels from the inside. Open the coat and press each lapel on its reverse side first. Then turn it over and press the roll line gently, without flattening it into a hard crease.
  5. Front edges. Press down each front edge, inside, so the button band and buttonhole band lie flat.

A slightly damp cloth over the collar helps with cotton that has dried very creased. Do not iron over embroidery directly; turn the coat over and press the reverse of that area, with a folded towel underneath so the stitches keep their shape.

Sleeves, back and pockets

Once the collar and lapels are done, the rest of the coat is quick.

  • Sleeves: lay each sleeve flat with the seam along the lower edge. Press from shoulder to cuff. Avoid pressing a sharp crease down the top of the sleeve unless you like that look.
  • Back: press across the shoulder area first, then down the back to the hem. A sleeve board or a rolled towel helps with the shoulder.
  • Pockets: press the pocket flat from the outside with a light touch, then press the pocket mouth so it lies closed.
  • Hem: finish with the hem, pressing from inside so the edge stays sharp.

Washing and drying white coats at home

Pressing is easier when the coat has been washed and dried well. General garment care for a white coat:

  1. Wash whites apart from coloured clothes. Even one new coloured item can tint a white coat.
  2. Use a warm wash for poly-cotton and a warm to hot wash for cotton, following the care label.
  3. Close the buttons and empty the pockets before washing, so buttons do not snag and nothing marks the cloth.
  4. Shake out and hang straight away on a hanger, rather than leaving the coat crumpled in the machine.
  5. Dry in the shade where you can. Strong sun over a long period can dull white fabric.
  6. Iron while very slightly damp for the smoothest finish, especially with cotton.

These are home care tips for the garment. If your hospital launders coats centrally, how that laundry runs is the hospital’s own decision, and the coat will be returned ready to wear.

Why a second coat helps

A single coat worn every day gets washed every few days, often in a hurry, and dried before it is quite ready. Two or three coats in rotation get gentler treatment and last longer. They also mean a coat is always pressed and waiting on the hanger.

Fabric choice helps too. Poly-cotton twill keeps a smoother look between presses, while cotton gives a softer, crisp finish when it is ironed. Our post on cotton or twill in hot weather compares them. If you would like a spare coat in the same style as your current one, see our doctor coats page, or order one on WhatsApp with your size from the size guide.

Doctor coats from NurseUniforms.co.in

Price on quotation. Bulk orders from 25 pieces per style.

More on doctor coats