Empty the pockets, wash the coat with similar colours on a warm cycle, dry it on a hanger in the shade and press it while slightly damp. That routine keeps most coats looking smart for a long time. Knowing how to wash lab coat cloth properly matters most for the collar, cuffs and front edges, which show wear first.
This post is general garment care for coats washed at home or in a small lab. If your hospital or college launders coats centrally, its own laundry process applies; that is the institution’s decision. We also cover the signs that a coat is ready to be replaced.
Before washing
A little preparation prevents most damage.
- Empty every pocket. Pens are the most common cause of ruined coats. One ink pen in a wash can mark a whole load.
- Undo the buttons. Washing a buttoned coat strains the buttonholes and can pull buttons loose.
- Remove badges and clips. Metal clips can snag the fabric and other clothes.
- Wash whites apart. Keep white coats away from dark clothing to stop them greying. Wash coloured coats with similar shades.
- Treat marks early. Dab fresh marks with cold water and a little detergent before the main wash. Hot water can set some stains.
Washing
A warm wash suits most white coats in poly-cotton twill or cotton. Use a cooler setting for coloured coats, especially navy, maroon and black, to keep the shade from fading. A normal cycle is fine; avoid long, very fast spins, which press deep creases into the cloth.
Use ordinary detergent in the usual amount. On white coats, an occasional whitening product helps if they start to look dull, but check that it suits the fabric. Do not use bleach on coloured coats.
If the coat has embroidery, turn it inside out, or at least fasten it so the stitching does not rub against other items.
Drying and pressing
Hang the coat on a hanger straight from the machine. Pull the collar, front edges and pockets into shape by hand while it is wet. This one step saves much of the ironing.
| Fabric | Drying | Pressing |
|---|---|---|
| Poly-cotton twill | Dries quickly on a hanger | Medium iron; often only the collar and front need it |
| Cotton | Slower; hang in the shade | Hot iron with steam, pressed while slightly damp |
| Coloured coats, either fabric | Shade, out of strong sun | Press from the reverse to avoid shine |
Press in this order: collar, then cuffs, then sleeves, then the front panels and back. Press embroidery from the reverse on a folded towel so the stitching keeps its raised look. Hang the coat up as soon as it is pressed.
Storing coats between wears
A coat kept on a proper hanger keeps its shoulders and collar. Wire hangers leave dents at the shoulder, and a coat folded into a bag or draped over a chair back creases at the waist and loses its line. In a shared lab, a row of hooks or a small rail near the door gives each coat its own place, which also stops coats being picked up by the wrong person.
Let a coat air before it goes into a cupboard, especially after a warm day. A damp coat shut away overnight can pick up a musty smell that takes another wash to clear. If coats are kept in lockers, leave a little space so they are not pressed against shoes or bags.
Small repairs that extend a coat’s life
Most coats fail at small points long before the cloth wears out:
- A loose button can be sewn back before it falls off.
- A pocket corner that has started to tear can be stitched by hand.
- A frayed buttonhole can be reinforced with a few stitches.
Keeping a few spare buttons in a drawer makes these repairs easy.
When to replace a lab coat
Replacement is a judgement about how the coat looks and works, not a fixed schedule. Look for these signs:
- Frayed collar or cuffs that cannot be pressed flat.
- Stains that will not come out, especially on the front or sleeves.
- Thin patches at the elbows or where the coat rubs against a bench.
- Faded or uneven colour, so the coat no longer matches the team.
- A poor fit, if the wearer has changed size.
- Torn pockets or lining that would take more work to repair than to replace.
Many people keep two coats so one can be worn while the other is washed. That halves the wear on each and makes it easier to keep both in good condition.
Reordering when coats wear out
When your coats need replacing, order them to the same approved sample so new and old match in cut and shade. Quote your earlier order and the quantities per size and fit. Bulk orders start at 25 pieces per style; individuals can order a single coat on WhatsApp, prepaid and sent by courier.
See all styles on our lab coats page. If you are choosing cloth for the next batch, our post on twill or cotton lab coats compares how each washes and presses, which is the other half of how to wash lab coat fabric well.